The HDO microfiber pad with a blue foam layer is designed for long-throw polishers when fast, effective removal of paint defects is needed. The strong microfiber structure delivers high cutting power, while the tapered profile helps reach tight areas and safely work near edges. The central cooling chamber reduces the risk of overheating, extends pad lifespan, and ensures consistent performance under heavy loads. This pad is a professional solution for deep oxidation and scratch removal.
----------------------------------------
Instructions for Use
1. Securely attach the pad to the polisher using the Velcro backing.
2. Apply a sufficient amount of cutting compound to the pad surface.
3. Before switching on the machine, spread the compound evenly over the area to be polished.
4. Polish at medium or higher speed, keeping the pad flat and applying even pressure. If needed, tilt the pad slightly to increase cutting power.
5. After polishing, wipe the surface clean with a microfiber cloth.
6. Clean the pad regularly during use to maintain maximum effectiveness.
----------------------------------------
Disclaimers and Recommendations
* Do not use in direct sunlight or on hot surfaces.
* Use only with cutting compounds suitable for microfiber pads.
* Wear protective gloves and safety glasses during use.
* After use, wash thoroughly and allow to dry completely.
* Store in a clean, dry place away from heat sources.
