Motor Clean is a highly effective engine flush additive. Active cleaning agents dissolve sludge and varnish deposits, bind solid particles and liquid contaminants, which are then drained together with the old oil during oil change.
After flushing, fresh oil can deliver its full performance – restoring engine power, reducing wear, optimising emission characteristics and preventing insufficient lubrication.
Suitable for all petrol and diesel engines, with or without turbocharger and catalytic converter. Compatible with all engine oil types.
DIRECTIONS
* Add to warm engine oil before oil change.
* Let engine idle for approx. 10 minutes.
* Drain old oil, replace oil filter and refill with fresh oil.
* 500 ml is sufficient for engines with up to 5 litres of oil capacity.
⚠ WARNING! Hazardous
* Causes serious eye irritation.
* May cause allergic skin reaction.
* May be fatal if swallowed and enters airways.
* Keep out of reach of children.
* Avoid breathing vapours/aerosol.
* Wear protective gloves and eye/face protection.
IF SWALLOWED: Immediately call a POISON CENTER or doctor.
IF IN EYES: Rinse cautiously with water for several minutes, remove contact lenses if present and continue rinsing.
Do NOT induce vomiting.
Store locked up. Dispose of contents/container at hazardous waste collection points.
Repeated exposure may cause skin dryness or cracking.Contains: Hydrotreated heavy paraffinic distillates (petroleum), hydrocarbons C10–C13 (<2% aromatics), calcium salts.
UFI: T5HA-HVC8-820S-D151
