An unbeatable all-arounder. Polish out sanding marks caused by P3000 grit, reliably remove smears, swirls, and shadows, and protect the high-gloss finish – all with a single product. This one-step polish combines speed and simplicity, making it ideal for novice polishers and the detailing of used and year-old vehicles.
PROCESSING
Rotary:
* At the start: 1,250–1,500 rpm
* Towards the end: 500–800 rpm
Orbital:
* Medium to lower rotational speed range
By hand:
* Medium pressure with circular motions
Recommended usage
1. Clean the surface thoroughly.
2. Shake the bottle before use and apply the polish to the Medium Cut Foam Pad.
3. They recommend a rotary or orbital polishing machine and the cross-coating method to achieve a perfect result. The polish can also be applied by hand using the Hand Polishing Applicator.
4. While polishing, exert moderately strong pressure to begin with, using the medium rotational speed range of the polishing machine. Reduce the pressure and the rotational speed during the final cycles.
5. At first, the polish will seem a little greasy and should be worked in until only a slightly transparent/oily film is visible.
6. Following application: Leave OSP 3in1 to dry for 5 to 10 minutes and remove any residual polish with the Premium microfiber cloth, without applying any pressure.
7. Depending on the demands of the surface, the 3in1 product can be reapplied using the Wax Foam Pad in order to achieve an even better finish.