This concentrated acid cleaner is designed for professional use and effectively removes brake dust deposits, rust, and mineral buildup from wheel surfaces. Quick and easy to use, it is ideal for removing long-standing dirt.
----------------------------------------
Instructions:
1. Ensure the wheel is cool and the working area is free from direct sunlight and wind gusts.
2. Prepare the solution in the appropriate ratio, depending on the level of dirt (use cold water).
3. Remove loose dirt with "Bad Boys Traffic Film Remover" and thoroughly rinse the wheel with a pressure washer.
4. Spray the cleaner onto the damp wheel and let it sit for a few minutes, avoiding drying.
5. Scrub the surface and hard-to-reach areas with a brush, ensuring the cleaner does not dry out.
6. Rinse the wheel with a pressure washer and wash with shampoo to remove any residue.
7. Repeat the last five steps if necessary.
----------------------------------------
Recommended Dilution Ratios:
* 1:1 to 1:4 – for heavy contamination.
* 1:10 – for light dirt.
----------------------------------------
Recommendations:
* Test in an inconspicuous area before use.
* Use only on a damp surface and clean one wheel at a time.
* Always pour acid into water when preparing the solution.
* Store tightly closed in a cool, dry place, away from frost and heat.
* Rinse the sprayer with water after each use.
----------------------------------------
Warnings:
* Do not use on matte, chrome, polished, or anodized surfaces.
* Do not let the cleaner dry on the surface.
* Avoid using on hot surfaces and prevent contact with glass.
