Inspire is a next-generation ceramic coating for enthusiasts characterized by its quick and easy application and excellent self-cleaning properties. It contains the addition of CNT, which makes the surface hydrophobic, gives it an amazing gloss, and slightly darkens it. The coating creates an invisible shield that protects your car from UV radiation, bird droppings, acid rain, and other weather conditions. With Inspire, it is easier to keep the paint clean, reducing washing time by up to 50% and eliminating the need for aggressive chemicals.
Features
* Quick and easy application
* Superhydrophobicity and high durability
* High slickness of the surface
* Chemical and UV resistance
* Wide spectrum of application conditions (temperature 8-35 degrees / air humidity 30-80%)
* Fast curing (12 hours)
* High ease of cleaning, reducing the need for aggressive chemicals
How to Use
1. Preparation:
* Shake the bottle for at least 30 seconds before use. Repeat before each application.
* Prepare the surface (paintwork, rims, windows, plastics, tires, and other rubber elements) by removing all contaminants, especially tar or iron fallout.
* If necessary, polish the paintwork to remove all imperfections.
* Degrease the prepared surface with a 50% IPA solution.
2. Application:
* Apply the product in sections (e.g., 40x40cm) using cross, overlapping movements with the attached applicator for paintwork, glass, and plastics, or a microfiber applicator for tires and rubber elements.
* Within 1-2 minutes after application, buff the product with a microfiber until streaks are completely removed.
* For glass and plastic elements, remove excess coating within 1-2 minutes.
* For tires, buff/remove excess coating within 1-2 minutes, depending on the tire's condition.
* Use approximately 20ml for a medium-sized car (paint only), 10ml for rims, and 20ml for windows, plastics, and tires.
3. Post-Application:
* Do not allow the coating to dry without buffing.
* Allow the coating to bond with the paint for at least 12 hours without interaction with water or other precipitation.
* If the paintwork gets wet within the first 12 hours, dry with a delicate microfiber cloth.
* Avoid washing the car with chemicals for the first 5-7 days; if necessary, use demineralized water only.
* The coating is fully activated after 24 hours.
Caution
* Carry out applications in a closed, well-ventilated room. Outdoor application is possible, but avoid direct sunlight and strong winds.
* Do not coat hot surfaces.
* Use gloves and a mask during application.
* Keep the product away from fire.
Expiration Date
2 years from opening the bottle.
