Ewocar Graphene Coating is an advanced ceramic coating infused with graphene to provide maximum surface protection, outstanding heat resistance, and a deep, glossy finish. Combining the durability of SiO₂ ceramic with the strength of graphene, it creates an extremely hard layer that helps resist scratches and keeps the surface clean for longer. This coating effectively protects against oxidation, road salts, and insect acids while reducing the formation of micro-scratches.
----------------------------------------
Instructions for Use
1. Thoroughly polish the vehicle surface to remove imperfections and ensure proper adhesion.
2. Wipe off any remaining polishing compounds and fingerprints using a degreasing product and a microfiber cloth.
3. Evenly saturate the applicator pad with the coating until it becomes damp.
4. Apply the product to an area roughly the size of half a hood using the applicator.
5. Allow it to cure for 1–3 minutes, depending on temperature, humidity, and the amount applied.
6. Remove excess coating with an ultra-soft microfiber cloth.
7. Gently buff the surface with a clean microfiber cloth. If high spots or streaks remain after 30–60 minutes, remove them with a degreaser or lightly re-polish the area.
----------------------------------------
Disclaimers and Recommendations
* Do not use in direct sunlight or on hot surfaces.
* Work in a well-ventilated area.
* Wear protective gloves.
* Keep out of reach of children.
* Avoid contact with skin and eyes.