Labocosmetica LIBERA is a professional concentrated alkaline pre-wash in the TFR (Traffic Film Remover) category, combining the cleaning power of an industrial-grade TFR with the safety of a premium pre-wash. Thanks to its T-7V surfactant blend and low alkalinity, it delivers exceptional penetration and deep cleaning while remaining safe on paints, waxes, sealants, ceramic coatings, wraps, and PPF. It is VDA-certified, dries slowly for maximum dwell time without streaks, and can be used on bodywork, wheels, wheel arches, door jambs, and engine bays.
----------------------------------------
Instructions for use:
1. Work in the shade on a cool surface.
2. Prepare the recommended dilution in a pump sprayer (commonly 1:20 for general pre-wash).
3. Spray onto dry bodywork from bottom to top.
4. Allow to dwell for 3–6 minutes without letting it dry.
5. Rinse thoroughly with high-pressure water, working from bottom to top.
Additional tips:
* For heavily bonded road film or before PPF application, follow with a second LIBERA pre-wash using a mitt at 1:20 dilution, or use an acidic pre-wash like Renova in a 2pH wash cycle.
* For intricate areas like wheels or badges, agitate with a soft-bristle brush.
----------------------------------------
Disclaimers and recommendations:
* Do not allow the product to dry on the surface.
* Always work in shaded, well-ventilated areas.
* Keep out of reach of children.
* Wear eye and face protection during application.
* Safe on all automotive surfaces when diluted as recommended.
* Not intended for use as a foaming pre-wash – apply as a mist for best results.