SAM is a modern single-layer ceramic coating based on Self Assembled Monolayer (SAM) technology. It forms a stable chemical bond with the surface, providing long-lasting protection against UV rays, chemicals, environmental contamination, and water spots. The coating enhances gloss, creates a hydrophobic layer with a 108° contact angle, and delivers a self-cleaning effect. Safe (PFAS-free) and compliant with the EU VOC directive, SAM offers durability of up to 2 years or around 30,000 km.
----------------------------------------
Instructions for Use:
Surface preparation:
1. Wash and decontaminate the vehicle thoroughly.
2. Remove any wax, sealant, or coating residues.
3. Polish the paintwork if scratches or defects are present.
4. Fully degrease using VÈRITAS (1:5).
Application:
5. Work indoors, in a dust-free and well-ventilated area.
6. Never work in direct sunlight.
7. Apply a small amount of SAM onto an applicator and spread evenly over a 50x50 cm section.
8. After a few minutes, remove excess with a microfiber cloth.
9. Continue until the entire vehicle is coated.
Curing:
10. Initial curing occurs within 12 hours, full curing within 36 hours.
11. Do not wash the vehicle for 7–10 days after application.
12. For faster curing, use an infrared lamp: keep 50 cm away at ~60 °C for 15–20 minutes.
----------------------------------------
Recommendations and Warnings:
* Always wear protective gloves and a vapor mask.
* Work only in a well-ventilated environment.
* Do not leave the vehicle outdoors during the first 12 hours of curing.
* Protect from moisture, rain, and sudden temperature changes during curing.
* Do not apply on hot surfaces or outdoors.
* Keep out of reach of children.
* Store away from frost and direct sunlight.
