TPR is a professional protective coating for plastic, vinyl, and rubber surfaces. Unlike dyes or fillers, it stops oxidation and restores the natural look of faded trims. It leaves a dry satin finish without artificial gloss and provides long-lasting protection against UV rays, smog, acid rain, and harsh washing chemicals.
----------------------------------------
Instructions for Use:
Preparation:
1. Clean the surface thoroughly with a suitable cleaner (e.g., Ductile or Traffic Film Remover depending on dirt).
2. Degrease with VÈRITAS.
3. Dry completely using a microfiber cloth.
Application:
4. Apply a small amount of TPR onto a sponge or microfiber applicator.
5. Work in small sections, spreading evenly until fully absorbed.
Finishing and Curing:
6. Allow the product to sit for about 1 minute.
7. Wipe off any excess with a dry microfiber cloth.
8. Avoid water contact for at least 24 hours.
9. For maximum durability, wait 7 days before washing or rain exposure.
Maintenance:
10. Wash the vehicle using the Labocosmetica 3pH cycle to maintain protection.
11. Reapply TPR every 12–24 months depending on use and environmental conditions.
----------------------------------------
Recommendations and Warnings:
* Protects plastic, vinyl, and rubber from UV rays, smog, acid rain, and chemicals.
* Restores natural black color on slightly faded trims.
* Provides a satin, dry-to-touch finish without an oily or wet look.
* Slows oxidation and prevents further fading.
* Apply in thin, even layers – do not overapply.
* Keep out of reach of children (P102).
* Do not apply in direct sunlight or on hot surfaces.
* If product contacts glass, painted parts, or seals, wipe off immediately.
* If swallowed or in case of eye contact, seek medical advice and follow the safety sheet instructions.
