VÈRITAS is a professional surface preparation cleaner essential before applying ceramic coatings or sealants. It effectively removes oils, wax, and polishing fillers, revealing true paint condition and highlighting fine scratches. It is also used to check coating durability by eliminating shampoo residues that may temporarily reduce hydrophobic performance. The product can be used pure or diluted, depending on the task.
----------------------------------------
Instructions for Use:
1. For removing old protection or surface preparation before coating: Use undiluted. Spray onto a short-pile microfiber cloth and gently wipe in straight motions without pressure.
2. For spot testing: Dilute 1:1, spray onto the surface, spread evenly with a microfiber cloth, and finish with the dry side.
3. For post-polishing inspection: Dilute 1:3–1:5 and use the same method as above.
4. For coating durability check: After washing, spray VÈRITAS onto a wet surface (e.g., bonnet) from ~60 cm distance, then rinse thoroughly with a strong water jet.
5. Avoid letting the product dry on the surface.
----------------------------------------
Recommendations and Warnings:
* Do not use on hot surfaces or areas exposed to heat sources.
* Avoid drying on the surface, especially on single-stage (direct gloss) paint systems.
* Always use with a microfiber cloth and without strong pressure.
* When using undiluted, never spray directly onto paintwork – spray only onto the cloth.
* Wear protective gloves during use.
* Keep out of reach of children.
* Store away from frost and direct sunlight.