2-in-1 shampoo specially formulated for black vehicles, matte finishes, and paint protection film (PPF). Gently cleans and protects while removing stubborn dirt, road film, and preventing water spot formation during drying. Highly lubricated formula allows the wash mitt to glide smoothly, reducing the risk of scratches. Safe for use on all paint types, wraps, and nano coatings. Highly concentrated – can be diluted up to 1:300, making it ideal for regular use.
----------------------------------------
Instructions for use:
1. Begin with a prewash using a foam gun to remove loose dirt.
2. Prepare the wash solution: dilute 4 capfuls of shampoo in 8 L of water (1:300 ratio).
3. Use the two-bucket method – one with shampoo solution, one with clean water for rinsing the mitt.
4. Work on one panel at a time, always in the shade and on a wet surface, from top to bottom.
5. Rinse the mitt in clean water after each panel before continuing.
6. For heavily soiled or dull areas, apply a few drops of shampoo directly onto the damp mitt and spread on the surface.
7. Rinse the entire car thoroughly from top to bottom using a high-pressure washer.
8. For safe and quick drying, spray Exterior Quick Detailer on the wet surface and dry with a microfiber towel. Use separate cloths for paintwork and glass.
----------------------------------------
Disclaimers and recommendations:
* Use only in shaded areas on cool surfaces.
* Do not allow the product to dry on the paint during washing.
* Always use the two-bucket method to prevent surface damage.
* Use only clean microfiber mitts or sponges.
* Keep out of the reach of children.
* Avoid release into the environment – harmful to aquatic life.
* Causes serious eye damage and may cause allergic skin reactions – wear protective gloves and goggles.
* In case of contact with eyes or skin, rinse immediately with water and seek medical attention if necessary.