Neutral Foam Shampoo produces foam above the market average: the foam forms a compact film that remains adhered to surfaces. It delivers intense and even lubricating action and encapsulates dirt, which facilitates its removal during the subsequent rinsing phase — without forming rings or streaks.
Thanks to strong emollient properties, it gently detaches all dirt without harming the surface. With WAX SAFE technology, the shampoo is suitable for frequent use — it removes surface contaminants that impair protective layers, without damaging the underlying protection.
When used by hand with a bucket, Neutral Foam Shampoo offers excellent economy: it can be diluted up to 1:400 (1 part shampoo to 400 parts water), making it ideal for frequent maintenance washes.
CHARACTERISTICS
Neutral Foam Shampoo is a 2‑in‑1 neutral‑pH car shampoo: usable by hand or with a foam gun. It produces soft, compact, and lubricated foam to avoid swirl marks and microscratches. Its intensive and homogeneous foam encapsulates dirt, enabling easy removal during rinsing without streaks or stains.
HOW TO USE
FIRST PHASE – PRE‑WASH WITH FOAM GUN
* Dilute the product for foam‑gun use at a ratio of 1:10 (1 part shampoo + 10 parts water).
* Spray the solution over the entire vehicle, always from bottom to top.
* Wait approximately 4 minutes so the foam thins out — avoid letting it dry on the bodywork. Perform in the shade and on a cool surface.
* Rinse thoroughly with high‑pressure water, from top to bottom. The foam rinses off quickly without leaving residue.
This pre‑wash removes about 80 % of dirt, especially coarse dirt — making the subsequent manual wash safer by reducing the risk of scratches when using a sponge or glove.
SECOND PHASE – HAND WASH WITH BUCKET
* Add 3 caps of shampoo into a bucket with 10 L of water. The ultra‑concentrated formula maintains neutral pH.
* Use a second bucket filled with clean water to rinse the sponge or glove.
* Wash in small sections from top to bottom, keeping the vehicle wet, using a soft sponge or microfibre glove.
* Rinse the sponge/glove frequently in the clean‑water bucket before moving to the next section — this removes coarse dirt particles trapped in the sponge, preventing abrasion or paint scratches.
* After washing, rinse thoroughly and dry the vehicle using an ultra‑absorbent “Super Dryer” microfibre cloth. Two cloths are recommended: one for bodywork, one for windows.
RECOMMENDATIONS
* Always wash the vehicle in the shade and avoid direct sunlight to prevent the shampoo from drying out and leaving stains.
* Never wash on hot bodywork: if the car has been exposed to the sun or the bonnet is hot, cool the surface with a jet of cold water before washing.
* Always start washing from the top, as it is the least dirty part — this helps avoid dirtying the glove or sponge and speeds up washing.
* Use the two‑bucket method — one for shampoo solution, one for rinsing sponge or glove — to avoid scratching the paintwork.
* Wash small areas at a time: this ensures the shampoo works optimally without drying out; it prevents stains and streaks.
* Clean rims and tires with a separate tool (sponge, glove, or brush) capable of reaching hidden spots.
* It is recommended to wash the vehicle every 1–2 weeks.
